Great for getting into tight spots but is a very hot hood. Not much room for the head to escape with it right up on my face.

I've had this mask for a few weeks and it's working great. It's definitely a different welding experience having the lenses closer to your face.

employee loves the hood very nice in tight spaces no more flash issues

I have an on board welder in my jeep and this works great in tight spaces and odd angles. Excellent field of vision and clearly a high quality unit. Much improved over fixed or adjustable googles.

The best thing for close quarters welding where a helmet is just too big Phenomenal!!!

As expected on the best from Miller!!!

I would recommend this for anyone who needs to work in small places.

Works great. It took a couple of rough starts to tune the settings for welding outside, but now it works like a fine tuned fiddle. As a iron worker I often times find myself welding in odd positions. This works great for tight places, however I will say I got a little flash burn in a strip across my forehead. This was corrected by lowering my hard hat a notch, now I don't even need the cloth cowl.

Nice design as well as the ergonomic fit I can say it's a great buy.

It's awesome from someone who welds everyday only problem is trying to flip it down. It fits in tighter spot and I love it!

I can only speak for winter. This is the best welding helmet I've had . Light comfortable and you can use it with am/fm radio ear muffs all day . The elastic band is s dream come true. The lens fogged up once rub spit on it like a diver and never happen again. I hope it's not too hot for summer. I love it you should buy one.

Lov'em. Being a professional welder you almost always get into tight spots.. This product eliminates the sport of trying to maneuver your regular hood into those spots.

I struggle with glare on the inside of lens on traditional hoods. These are lightweight and work great. No back glare! Just make sure you wear your FITTED ball cap backwards!! That is if you decide not to wear the headress thing. I made the mistake of wearing one forward and tucked down. Got a mean flash burn on my forehead!

I bought this for welding roll cages to get into tight spaces, I'm pretty sure this is as good as it gets. The auto dim all works the way it's supposed to, for the money it can't be beat. It does fog up on me, but I fog any goggles I wear

I work as a designer/fabricator for a 600 person factory. The mask is my go to when I'll be welding for more than a .5 hr. and won't need to keeping checking my fit, or close tolerances.

i bought this to wear while welding inside equipment ,where 3 and sometimes 4 people are welding back to back. no matter how much you leather you hang around your hood the light finds a way through! this hood (face mask) stops it all best investment the whole crew has made . no more wearing wash clothes over eyes at night. not to mention how light it is and the tight spots i can now get in. oh yeah no more burns in the ear i cant express how grateful i am for that.

These let you get into places that a helmet never allow. And the fact there just awesome looking is a bonus also.

best investment i have made in welding. fits great works great and gets you into those tight spots

Bought this to weld in tight spots where normal hood couldn't be worn and I have to say it is worth every penny. Great price by the way also. I was welding 6 inch chilled water mains about eight inches from ceiling to top of pipe with everything else imaginable in the way also. This work great seeing the top or side where I couldn't wear my normal hood. It's already paid for its self. The clarity is amazing also. Wish it had a grind mode is really my only complaint so far.

Got it to work in places my normal welding helmets don't fit. The hood fits nice and is not hot at all. Mask fits nice takes a minute to get used to but works great . My buddy has already ordered his.

Very nice gonna work great in tight areas

I enjoy my goggles. Fits well.

Great for tight spots. But the reason why I gave it a 3 is the mask is to close to your face making the gargles to fog up

Great welding hood super clear but make sure your forehead is covered. Great for tig welding. Grab some anti fog wipes

The goggles work great its nice to be able to weld in close places or laying on your side or any other odd positions. When I weld out side I don't have to worry about the sun casting a reflection on the lens like on my full face hood.

I really do like the goggles there're working fine for me. My problem with them is the presentation: I'd like when I buy a Miller is a Miller. The "elastic band" cannot be removed for clean up purpose. When look at the others they're the same, no Miller logo what so ever on the goggles as well as the carry protective bag.

Not only do they look good, but they're great! I love them

Where has this mask been all my life! It's a excellent piece of equipment for repair welding where tight spots come with the territory. The only thing is you will sometimes get into such tight spots that the two sensors become blocked and you will get a flash or two. If they added a third sensor in the middle it would be untouchable and I would get rid of my digital elite. But for now it's the ticket for tight spots my elite won't let me get to. Totally worth 190.00!

Very good for tight spots, makes my job easier

If you like goggles you will like these. The best part is that there is absolutely no background light getting in. The auto darkening works great and the usability is only a little less handy than a hood. I have been using the goggles to tig weld and am very happy with the fit. The only thing I noticed is that they can fog if you don't adjust them right as your breath gets deflected by the face shield up into the goggles. Just make some adjustments. I also like the frames for prescription lenses. The frame is a friction fit but be careful you don't knock them out of the rubber tab that holds them in. This is a feature that easily allows you to clean the lenses or in my case I will get another insert in order to use different cheater strengths. I made my own inserts by using masking tape to transfer the shape to the lenses of some regular reading glasses.

Functions fantastic. Price was the best. No right space issues anymore.

My husband loves it

Small, light, low profile. Makes it easy to get into places a normal hood wouldn't fit. No issues at all. I'll probably buy a second one.

I didn't order this for me directly but for my son and he hasn't had a chance to try.

Mask fits tight like a dive mask with sealed edge . Good throat protection from blue hood . It can fog some on cold days at first . Great feel , clear bright view down to 30 amps . The mask is wider below the eye than shown in photo . Packs into a pouch the size of two soda cans . Stays in place when welding at odd /near inverted positions .

This mask eliminates restrictions for welding in tight places. With this mask I can get in there and see to weld.

I do a lot of work in the oilfield business, so there's a lot of confined space work involved as well as joints that are up against walls and corners. safety is always a must so at times it's almost impossible to get a good weld in without having to worry about knocking off your hood, or trying to get into a position so you can see the weld. but these googles put an end to all that. you can see the area very clearly. I don't wear glasses but the frame for the rx lenses is an excellent idea. at first i thought it might be hard to breath with the mask so close to my face but that's not an issue. it's not something you would wear to do some extensive welding, cause you can't flip it up like a welding hood when your in low light. but other then that it is very comfortable. it comes with the mask and hood so you're ready to go right out of the box. I wish I would have had this about 2 years ago, it would've made my job a hundred times easier.

This is the best hood if you are in the boiler field of work you can get to welds that others just laugh at

This shield is awesome for what I build. Best purchase I have made in a long time.

Awesome for tight spots

I've been welding 7018 3/16" rod for around 6 hours now love the shield shade 11 seems alright for me 13 is a little dark instead of a green tint to the welding arc is white/sliver kind of like my nexgen made by Jackson for the price def a good hood I can weld put in the open with it or in a tight spot wear my hard hat with it I'm not sure if I'll be able to get a respirator under it tho

For getting into difficult spots where a helmet gets in the way (which was the issue which lead to the purchase of these goggles) they're just great. Also for quick say MIG spot welds they're fantastic and although not specifically designed for such I can easily push them up onto my forehead between welds then pull into position. The auto-darkening shade works as well as my Miller Helmet so I'm extremely pleased with this purchase. This is the very same auto darkening goggles by the Korean Co. Servore as advertised online yet purchasing through CyberWeld you get both a protective mask and protective headgear for nearly the same pricing all with free shipping. Total WIN WIN.

bought weld mask and goggles from Cyberweld. They have the lowest price. Very comfortable and easy to set. No head or neck strain and worked perfect. Probably will buy a second set for back-up.

I bought this mask as a gift for my boyfriend. He is in love with it. He now carries it around in the little bag that comes with the mask. It was a great find for a good price.