So far the millermatic 211 has performed as I expect a Miller mig welder to perform . I have a mm130 that I used for bodywork and it's 19years old and going strong still . I plan on building a trailer with the MM211 .

Arrived on time and well packed, Works well and 1/2 the size of my 210

Excellent machine! Can't beat the price!

My order was fast and price was great. I'm now waiting on my rebate/spoolmate 100 spoolgun. I'll see how fast this is

I weld almost everyday, but my shop setup is "rustic". From the beginning, I've needed a welder setup that would work in (and roll) a gravel floor environment. I started out with a Hobart Handler 190, and moved up to a Hobart 210 MVP for the dual voltage. Both welders worked flawlessly, and I have nothing but praise for Hobart. But, I wanted to move up to a bigger welder, and had my sights set on the Ironman 230. As I mulled over my options, I kept coming back to the point of portability- a cabinet welder was going to be too big and heavy for how I used one. I would have to build an offroad subframe for it so that I could use air tires for rolling (which is what I had done for the two Hobarts- I built an offroad welding cart with 10" tires) and I would still be moving around a 200 pound welder. Then, I saw the Miller 211MVP- the same basic machine as the Hobart 210- on sale at Cyberweld. From reviews, it seemed that it was a little hotter than the Hobart, and although it wasn't a 250 amp machine, it would do what I needed (like the Hobart had). The advantages over the Hobart were infinite voltage, autoset (which I don't prefer- I would rather fine-tune the setting, and know my welder), a hotter arc (which it has- the Hobart 210 MVP has a softer arc), and in my case, Miller was offering a free spoolgun with purchase. So, I figured I could get into the Miller for about the same price as the Hobart, and have a few upgraded options. What I didn't realize was that Miller was also offering a $200 rebate on top of the free spoolgun, which made it a fantastic value. I was able to get into the Miller for less than the Hobart, and have a spoolgun. After running the Miller for about 2 weeks now, I have these observations- 1)It is a quality machine, has similarities to the Hobart (Hobart and MIller are owned by the same parent company), and I am confident in both the Hobart that I sold and the Miller that I now own. 2) The few upgrades of the Miller make it a slightly more refined machine, and I expect long service out of it. 3) At comparable settings, the Miller welds hotter and penetrates deeper than the Hobart. While both are the same amperage machine, my impression is that the Miller will penetrate more thoroughly on max settings than the Hobart, making it slightly more machine. While it is heavy with a spool of wire installed, it is still portable. You won't climb a ladder and balance it on your knee while welding ductwork, but you can move it around, put it in the back of a truck, etc. It is max power while still having portability. Overall, I am extremely impressed with the Miller. The Hobart 210 had served me well, and was a value compared to the normal price of the Miller. But, with the free spoolgun and rebate, the Miller is more welder for less money, which is what we are all looking for. I have made two purchases from Cyberweld, now- the welder, and consumables. Both purchases were easy, shipping was quick, and there were no hitches. I will buy again from Cyberweld.

Highly recommended for the novice or pro.

This welder is great for many applications with the MVP. It makes it easy to take it to a small job using 110 volt or at the shop doing bigger things with 220 volt. Just twist off the end and put the one you need in place. Plug in and go. The auto set works well too. For the beginner to a pro this welder is awesome. I had other welders this one is by far the BEST out there. Cost a little more BUT as always you get what you pay for. WILL BUY ONLY MILLER FROM NOW ON.....

Great product sold by cyberweld honoring the Miller rebate. Got 400$ of Miller product with the current rebate from Miller sold by cyberweld and all is great. Exceptional service and fast shipping to your door step.

The whole. Buying experience from CyberWeld was very good. The price was good and Millermatic 211 is a very user friendly mig. I bought the 211 because of the dual voltage. I am very happy with my choice to go with the Millermatic 211 and. CyberWeld. 5 Stars all around!!!!

I have used the mm 211 for about two months at work and love it every time I turn it on. To give you a idea of how hard this one gets worked I work for the railway. after using this mm 211 I have plans on getting one of my own. easy to set up and welds smooth. Im with most people when you look at the cost your shock but trust me it worth it. I will own my soon

Always heard good things about cyberweld , and they're true.

I've been making my living fabricating in various fields for the last 30 years. From High end Street Rods to Automation and Robotics so I've experienced most every type of welding and fabricating with various manufacturers. I've always liked Miller equipment for some reason, Not that Lincoln or other quality brands are bad but always had good luck with Millers quality. That being said, Purchasing this welder over comparable brands and machines was a difficult decision. I needed the highest capacity small footprint welder I could get for under $1500 and refused to buy used. I was torn between the newest Miller 190 and this 211. I test welded the 190 and was very impressed with its performance but opted for the advertised additional capacity of the 211. It performs flawlessly on everything from 16ga on up to the 3/8 mild steel so far. Smooth starts and butter smooth welding. I thought the auto set feature was just a gimmick until I started using it and found it to be almost spot on! Would be amazing for a beginning welder. Cannot say just how pleased I am with this purchase. Thank you Miller and Cyberweld for Top notch sales and service. I'm a customer for life!

Perfect welder for my needs. I bought mainly because it could weld aluminum stainless and carbon, flux and mig. Another big selling point is the multi volt plug allowing a simple no tool change from 240 to 120. Takes 2 or 10 lb spools. Comes with argon/co2 regulator and hose. Welds bread on mig or flux. $200 rebate and rebate for $280 spool gun from miller really sweetened the deal.

what can I say any miller product is awesome right out of the box. I also think cyberweld rocks always has good deals and good delivery. my package is always packed good no damage ever. also bonnie took care of me and helped me get all the rebates I was entitled to thanks again bonnie.

I have owned 3 mig welders at my body shop. The welder I replaced was a Snap-On. The Miller 211 is the best I have ever used and I like the smaller size they make now. This will weld everything from sheetmetal to 3/8". Was shipped fast...3 days. I love the 110/220 feature. Same welder operates on either voltage. If you want the best at a great price BUY THIS WELDER!

I have only tested the Miller 211 on some 16 gauge sheet metal, but it works great. The auto set feature is great for beginners like me. I am very glad I bought it. CyberWeld's great price, free delivery and the Miller rebate, make this welder a bargain.

Easy setup and prompt delivery!!

I had to replace my Hobart CC/CV and this did the trick. Staight from the box ready to use, easy set up...no problems so far.

Used this to welder two weld two 1/2 plates together and some 18ga sheet together, Just adjust the heat from one end to the other and it made an poor welder look like I knew everthing.

At first glance the welder is much bigger than my older 90amp gasless welder. The Welder is also very heavy as it probably should be. It's build quality is definitely there judging by it's weight, the thickness and ultra flexibility of the wires it uses on the gun and clamp, as well as the internal drive gear system. The controls on the welder are also very limitless and you can dial in the knobs to any level of amps and voltage. I can definitely hear the difference as well when putting down weld, it has a very smooth and crisp sound like air going through a pipe mixed with the typical sparking crackling sound. The metal penetration is also excellent. There is just something about this machine when you are welding, you just feel the quality in the control and action of the gun. I was going to go for the Hobart, but with the Build it Blue rebate this Miller would have been the same price. So I definitely went with the well known Miller.

My first MIG was a "bargain" brand and I wasn't getting very good results. I thought it was my lack of experience. I finally decided to move up to a premium brand and since I've had a Miller stick welder for over 15 years, I went with the Millermatic 211 w/ Auto-set. The unit arrived within a few days and was very easy to set up. Since I don't do a lot of welding, I decided to buy a 90 cu ft gas bottle and avoid the lease payments on the larger bottles. I know my cost per cu ft of gas will be higher on refills, but should balance out with no lease payments. Found some scrap .125 2" square tubing, set the dials on the welder's Auto-set and the first pass gave me that satisfying "buzz". No sputtering, no tips sticking to the work, just a nice bead with proper penetration. I've got some 16 GA square tubing that I'll work with next. I don't expect any problems. I should of heeded my grandfathers advice, "It's the poor man that pays the high price." Good solid equipment is worth the money!

Great machine. One pass on 3/8" steel with .030 flux wire. Best mig machine I have used in this size and price point.

Great company to do business with. Product exactly as discribed, discount price is for real not a scam product works excellant

Great welder

I've had my 211 about 5 or so years now & it's still going strong. I've used it to make all kinds of stuff from light to fairly heavy material including aluminum.

I have used this welder with the 110 volt and 220 volt, bot weld very nicely. The auto set works perfect! I would highly recommend this welder! Shipping was very quick and the welder was delivered to my door!

Great unit

I have not plugged the 211 in yet.....I just sit there admiring the blue thing.......I dream of becoming a master welder......but at 84 years old, I think I have missed my chances.......however.....let me get back to you after awhile and way more practice!!!!!!!!!!!!!

I did a lot of research prior to making this purchase and am extremely satisfied with the Miller 211. I had only used a 110v flux wire welding machine prior to this one and the 240v with gas makes a huge difference. I have not tried the 211 with 110v input yet

This welder makes a back yard mechanic like me look like almost a pro.

Bought it to replace old Hobart 175, opened it hooked up gas, put in a 10# roll of .030 turned it on auto set, welds perfectly right out of the box. Zero guess work. With the spool gun this welder was the most affordable way to go for aluminum mig. Clean welding from here on out, love it. extremely happy with it so far, does everything I expected it to do. Also this is my 4th purchase from cyberweld and I wont buy anywhere else cheapest place to shop on the web.

The welder started smoking out the rear fan area while setting up the wire tension and gas flow. Never burnt a wire. Called Cyber weld and they had me call Milller Welding and talk to a tech about it. He recommended replacement. Called Cyber Weld and within 10 min a new welder was on the way and a pickup tag was sent out for the broken one. Great service...

The welder arrived in excellent condition, as did all of the rest my order. This is my second order from CyberWeld and their service been excellent. I haven't used the machine yet, but I've got several projects lined up and I'm glad I don't have to use my old red cracker box.

Great all around welder easy to use

Great welder... being a full time welder and CWI , I was a little worried this welder may not produce very good welds since I am use to running big welders and big wire but much to my surprise it does a great job when hooked to 220 and a decent job when hooked to 110. I would recommend this welder.

Easy to use. Makes very nice welds with a little practice, even out of position.

Very good welder, I knew I made the right choice with the first weld, no splatter and smooth.

GREAT SIZE AND COMPATIBILITY WELDER

If you can afford to buy this welder, just do it. You wont be disappointed at all. ;)

great welder for the professional beginner or the home shop 120v/240v , but not designed for the 3phase plant use 120v/208v.

for 20 years I have been welding with a 120 volt Miller mig welder . I've built a lot of stuff with it over these years and its still looks and runs like it did new. I'm getting ready to build a hotrod and I needed a 220 volt welder that would really penetrate, so I bought the Miller 211. not only is it the same size as my old welder and fits on the old car,t but it runs on either 220, or 110. It's just a matter of switching the plug. It welds like a dream on 220 and the auto set feature works well. It looks well built and I'm looking forward to years of service out of it.

Everything you need in a box, great for sheet metal repair on my 46 chevy coupe.

The Miller 211 is a fantastic welder for field fabrication work. The auto-setup feature performs flawlessly.

I had it out of the box and welding in about 15 minutes. Great power, even on 120v. Nice bead. Smooth delivery set on Auto.. Simply measure your metal thickness, set your machine on auto and weld away.

Delivery time was excellent. I ordered it on Saturday and had it on Tuesday.

Works cherry, but you gotta move along pretty quick in the auto setting for thinner metal but i wouldn't give it back.

Easy to use good instructions I have always used miller always will my next is miller is a Tig welder /plasma cutter

I have only used my new welder a few times since i got it but i really like the way it works. The auto set allowed me to start welding as soon as i got it set up. perfect for the novice who doesnt weld every day. I would imagine it would be perfect for the guy who does weld every day on smaller material. I welded 3/16 steel with no problem.

does everything and more

Great welder and quick shipping!